Cylinder Calulators
Cylinder Force
To calculate extension force set the rod diameter as 0. To calculate retract force you must insert the rod diameter.
| Head Diameter (in) | |
| Rod Diameter (in) | |
| Pressure (PSI) | |
| Force (Ton) |
Cylinder Extend Time
| Flow Rate(GPM) | |
| Cylinder Diameter (in) | |
| Cylinder Stroke Length | |
| Extend Time |
Cylinder Retact Time
| Flow Rate(GPM) | |
| Cylinder Head Diameter (in) | |
| Cylinder Rod Diameter (in) | |
| Cylinder Stroke Length | |
| Retract Time |
Pump and Motor Calulators
Pump and Motor Flow
| Flow Rate(GPM) | |
| Speed (RPM) | |
| Displacement (in³/rev) |
Pump and Motor HP
This calculator uses a fixed 85% efficiency. Most pumps and motors are 80% to 90% effecient.
| Flow Rate (GPM) | |
| Pressure (PSI) | |
| Horsepower (HP) |
Pump and Motor Torque
| Torque (in-lb) | |
| Pressure (PSI) | |
| Displacement (in³/rev) |
Useful Converstions
Length
| in | |
| cm |
Volume
| in³ | |
| gallons | |
| cc |
Pressure
| PSI | |
| kPa | |
| bar |
Power
| Kilowatts (kW) | |
| Mechanical Horsepower (HP) | |
| British Thermal Units per Hour (BTU/hr) |
Torque
| Foot Pound (ft-lb) | |
| Inch Pound (in-lb) | |
| Newton Meter (N•m) |
Temperature
| Fahrenheit (°F) | |
| Celsius (°C) |